Table of Contents
Advertisement
RRU3942&RRU3642
Installation Guide
Step 2 Strip the specified length of the sheath off the power cable, as shown in
Figure 11-3 Stripping the specified length of sheath
Step 3 Strip a specified length of sheath off each core wire. The length must be consistent with the
length of the notch in the tool-less female connector (pressfit type), as shown in
Figure 11-4 Stripping the sheath off each core wire
Figure 11-5 Matched length
Step 4 Add a tool-less female connector (pressfit type) to two core wires.
1.
Issue 07 (2013-12-30)
Tighten the screws using a Phillips screwdriver, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Appendix
Figure
11-3.
Figure
11-4.
Figure
11-6.
119
Advertisement
Table of Contents
