Page 1
PS 7462 ® Safety Guide & Assembly Instructions Safety Zone PS 8870 PS 8823 PS 7958 Safety Zone Safety Zone PS 8813 PS 7952 PS 7946 PS 8824 PS 8876 Call Toll Free 1-888-752-9782 We’re Here To Help! Customer Service: Monday - Friday, 8:00 A.M. to 5:00 P.M. C.S.T.
Page 2
• Thoroughly read all safety instructions before Testing and Materials (ASTM) Home Playground beginning. Safety Standard. In order for PlayStar to comply with the ASTM Standard, we cannot recommend • Children must remain clear of construction site until anyone above these limits.
SAFETY INSTALLATION: 2. Only one child, for each single planned 4. Dress children appropriately and do not seat or single planned activity should allow them to wear inappropriate items, 1. Follow the instructions provided, do not be allowed on this set at one time, with such as but not limited to, loose fitting alter its design in any way.
Page 4
FC 3109 FC 3128 FC 3128 FC 3175 FC 3129 FC 3175 FC 3129 FC 3109 Swing Seat Discovery Telescope FC 3125 FC 3125 Play Handles FC 3174 FC 3230 FC 3110 Gym Ring FC 3110 FC 3174 Tarp FC 3230 FC 3211 FC 3211 FC 3108...
Page 5
HW 1216 HW 1204 (218) #8 x 1Z/x" (219) #8 x 2Z/x" #8 x 2¹ ₂" deck screw #8 x 1¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 HW 1201 HW 1214 HW 1223 #8 x B/," (12) Z/v"...
Page 6
Lumber Notes: • Boards are marked with nominal • 2" thick boards will be drilled dimensions. during assembly process using drill marking template. 10C/v" • Actual size may vary. • Always use any pre-drilled FC 3561 • Assembly is easier if boards are boards as the drill template to stacked by marked size before drill 1"...
Icon Glossary Place tower or component in Secure screw (flush to top) with desired location. bit size shown. Mark board with template using pattern shown on this step. Secure hardware with Note: DO NOT drill through socket/wrench size shown. template. Pre-drill into second board with Drill through board at correct correct depth and bit size shown.
Page 8
Safety Warning Glossary CAUTION: Minimum spacing is required from the CAUTION: These boards should be pre-drilled closest point of all other rides or stationary objects. and countersunk to avoid cracking. Note: Adjust countersink tool to width of first board to countersink to proper depth.
Be sure boards/brackets are tight against each other. Be sure boards/components are spaced the distance listed. Be sure to equally space. Be sure boards rest on the ground. Playstar Logo showing: Use tabs to square on corner of board. Arrow showing: Use tabs to slide along edge of board to drill location.
Page 11
Tower- All Design Options HW 1204 (16) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3604 (4) 2" x 4" x 39" 2" x 4" x 39" 1/16" = 1" (2) 2"...
Page 12
HW 1204 (16) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3604 (4) 2" x 4" x 39" 2" x 4" x 39" 1/16" = 1" (2) 2" x 4" x 8' 1/16"...
Page 13
HW 1204 (36) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3534 2" x 4" x 46C/v" 2" x 4" x 46³ ₄" 1/16" = 1"...
Page 14
HW 1213 (32) #8 x 1Z/v" SA 4496 #8 x 1¹ ₄" deck screw SA 4496...
Page 16
HW 1204 (4) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3534 2" x 4" x 46C/v" 2" x 4" x 46³ ₄" 1/16" = 1" 19Z/x" HW 1216 (90) #8 x 1Z/x"...
Page 17
HW 1204 (18) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 (2) 2" x 4" x 8' 1/16" = 1" 2" x 4" x 96" 21Z/x" 21Z/x"...
Page 18
HW 1204 (12) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3542 2" x 4" x 21Z/x" 2" x 4" x 21¹ ₂" 1/16" = 1" 75Z/v" 75Z/v"...
Page 19
HW 1204 #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3534 2" x 4" x 46C/v" 2" x 4" x 46³ ₄" 1/16" = 1" NOTE: Be sure boards have equal overhang. 4C/v"...
Page 20
HW 1213 (16) #8 x 1Z/v" SA 4496 #8 x 1¹ ₄" deck screw SA 4496 HW 1411 HW 1301 C/," (8) C/," ³ ₈" lock nut HW 1527 HW 1528 ³ ₈" washer C/," x 3Z/x" C/," x 2" HW 1527 BOLT HEX HDG 3/8-16 X 3 1/2 ³...
Page 21
HW 1216 (16) #8 x 1Z/x" #8 x 1¹ ₂" deck screw FC 3565 (4) 1" x 4" x 29Z/x" 1" x 4" x 29¹ ₂" 1/16" = 1" 1"...
Page 22
HW 1216 (24) #8 x 1Z/x" #8 x 1¹ ₂" deck screw FC 3565 1" x 4" x 29Z/x" 1" x 4" x 29¹ ₂" 1/16" = 1" 1"...
Page 23
Bronze & Silver Only (Gold-Skip to Page 26) HW 1204 (10) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3520 2" x 4" x 28Z/x" 2" x 4" x 28¹ ₂" 1/16"...
Page 24
HW 1204 (18) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3534 2" x 4" x 46C/v" 2" x 4" x 46³ ₄" 1/16" = 1" 6Z/x" 26"...
Page 25
HW 1212 (16) #14 x 1Z/v" #14 x 1¹ ₄" W LAG HDG 3/8 X 1 1/2 pan head screw SA 4494 Climbing SA 4494 " 7Z/x 36" 24" 12" 0"...
Page 26
(Bronze & Silver Gold Design Option Only -Skip to Page 31) HW 1204 (10) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3520 2" x 4" x 28Z/x" 2" x 4" x 28¹ ₂" 1/16"...
Page 27
HW 1204 (18) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3534 2" x 4" x 46C/v" 2" x 4" x 46³ ₄" 1/16" = 1" 26" 6Z/x"...
Page 28
HW 1204 (18) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3539 2" x 4" x 32Z/x" 2" x 4" x 32¹ ₂" 1/16" = 1" FC 3520 2" x 4" x 28Z/x" 2"...
Page 29
HW 1204 (12) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3519 2" x 4" x 31Z/x" 2" x 4" x 31¹ ₂" 1/16" = 1"...
Page 30
HW 1212 (16) #14 x 1Z/v" #14 x 1¹ ₄" W LAG HDG 3/8 X 1 1/2 pan head screw SA 4494 Climbing SA 4494 " 36" 24" 12" 0"...
Page 31
Roof- All Design Options (Bronze Pictured) HW 1212 (12) #14 x 1Z/v" #14 x 1¹ ₄" CREW LAG HDG 3/8 X 1 1/2 pan head screw FC 3517 FC 3174 2" x 4" x 35M/," 2" x 4" x 35⁷ ₈" 1/16"...
Page 32
HW 1216 #8 x 1Z/x" #8 x 1¹ ₂" deck screw 6Z/x" 6Z/x" Z/x"...
Page 33
HW 1204 (12) #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3534 2" x 4" x 46C/v" 2" x 4" x 46³ ₄" 1/16" = 1"...
Page 34
HW 1212 #14 x 1Z/v" FC 3230 #14 x 1¹ ₄" SCREW LAG HDG 3/8 X 1 1/2 pan head screw Tarp FC 3230 1C/,"...
Page 35
HW 1204 #8 x 2Z/x" #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 NOTE: Rest screw on board. 5M/," 5Z/v" 1B/," 2C/," NOTE: Be sure roof is level with equal overhang on all four corners.
Page 36
Swing Beam- All Design Options #8 x 1Z/v" SA 4492 SA 4493 HW 1213 #8 x 1¹ ₄" SA 4493 SA 4492 SA 4493 deck screw Sturdy Frame Sturdy Frame (3) 4" x 4" x 8' Brackets 1/16" = 1" 4 "...
Page 37
C/," HW 1301 HW 1411 C/," ³ ₈" lock nut ³ ₈" washer C/," x 4" HW 1514 ³ ₈" x 4" hex bolt HW 1514 BOLT HEX HDG 3/8-16 X 4 SA 4493 SA 4493 SA 4492...
Page 38
C/," x C/v" HW 1515 HW 1411 C/," ³ ₈" x ³ ₄" ³ ₈" lock nut hex bolt SA 4492 SA 4493 SA 4492...
Page 39
FC 3534 2" x 4" x 46C/v" 2" x 4" x 46³ ₄" 1/16" = 1" #8 x 2Z/x" HW 1204 #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 51Z/x" 93Z/x" 51Z/x"...
Page 40
#8 x 1Z/v" HW 1213 SA 4496 #8 x 1¹ ₄" deck screw SA 4496 HW 1301 C/," x 2" HW 1528 C/," HW 1528 BOLT HEX HDG 3/8-16 X 2 ³ ₈" washer C/," x 4" HW 1514 HW 1411 C/,"...
Page 41
#8 x 1Z/v" HW 1213 #8 x 1¹ ₄" deck screw (1) 2" x 6" x 10' 1/16" = 1" 2" x 6" x 120" FC XXXX NOTE: If you do not have saw horses, rest beam on the ground. 30Z/x"...
Page 43
#8 x 2Z/x" (10) HW 1204 #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 (1) 2" x 6" x 10' 1/16" = 1" 2" x 6" x 120" FC XXXX 0" 24" 60" 76"...
Page 44
NOTE: If you do not have saw horses, flip the beam over. C/," x 4" HW 1514 ³ ₈" x 4" hex bolt HW 1514 BOLT HEX HDG 3/8-16 X 4 (10) HW 1411 C/," C/," HW 1301 ³ ₈" lock nut ³...
Page 46
FC 3111 FC 3111 Swing Swing FC 3111 FC 3111 Hanger Hanger 99Z/x" 83Z/x" 66Z/x" 50Z/x" 17" 3" 99Z/x" 0" 83Z/x" NOTE: Brackets and Installation instructions included with Air Rider. C/," x 3" HW 1301 C/," HW 1201 ³ ₈" washer ³...
Page 48
#8 x 2Z/x" HW 1204 #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3519 2" x 4" x 31Z/x" 2" x 4" x 31¹ ₂" 1/16" = 1" 37B/,"...
Page 49
#8 x 1Z/v" HW 1213 SA 4496 #8 x 1¹ ₄" deck screw SA 4496 C/," x 2" HW 1528 C/," HW 1301 HW 1528 BOLT HEX HDG 3/8-16 X 2 ³ ₈" washer C/," x 4" HW 1514 HW 1411 C/,"...
Page 50
Monkey Rings - Bronze & Gold (Silver-Skip to page 60) HW 1213 #8 x 1Z/v" #8 x 1¹ ₄" deck screw FC 3534 SA 4495 2" x 4" x 46C/v" 2" x 4" x 46³ ₄" 1/16" = 1" SA 4495...
Page 51
HW 1213 #8 x 1Z/v" #8 x 1¹ ₄" deck screw (1) 2" x 4" x 8' 1/16" = 1" 2" x 4" x 96" 2"x 4"x 8' FC 3534 HW 1301 HW 1411 (6) C/," C/," ³ ₈" lock nut ³...
Page 52
HW 1213 #8 x 1Z/v" #8 x 1¹ ₄" deck screw FC 3534 SA 4495 2" x 4" x 46C/v" 2" x 4" x 46³ ₄" 1/16" = 1" SA 4495...
Page 53
HW 1213 #8 x 1Z/v" #8 x 1¹ ₄" deck screw (1) 2" x 4" x 8' 1/16" = 1" 2" x 4" x 96" FC 3534 2"x 4"x 8' HW 1301 HW 1411 (6) C/," C/," ³ ₈" lock nut ³...
Page 54
#8 x 2Z/x" HW 1204 #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 FC 3541 2" x 4" x 24Z/v" 2" x 4" x 24¹ ₄" 1/16" = 1" FC 3524 2" x 4" x 18Z/x" 2"...
Page 55
HW 1216 (84) #8 x 1Z/x" #8 x 1¹ ₂" deck screw FC 3561 (14) 1" x 4" x 21M/zn" 1" x 4" x 21⁷ ₁₆" 1/16" = 1" 12Z/v" 9Z/x"...
Page 56
HW 1611 FC 3108 FC 3108 HW 1611 (12) HW 1214 Z/v" x 1Z/x" HW 1214 SCREW LAG HDG 1/4 X 1 1/2 SCALE 1:1 0" 11Z/v" 23Z/v" 35Z/v"...
Page 57
#8 x 1Z/v" HW 1213 SA 4496 #8 x 1¹ ₄" deck screw SA 4496 C/," x 2" HW 1528 HW 1528 BOLT HEX HDG 3/8-16 X 2 HW 1301 HW 1411 C/," C/," ³ ₈" lock nut ³ ₈" washer...
Page 58
#8 x 1Z/v" HW 1213 #8 x 1¹ ₄" deck screw 92C/v" 2Z/x" NOTE: Dig into ground for leg beams.
Page 60
Adventure Tunnel Kit- Silver Only NOTE: Follow the instructions included with the Adventure Tunnel Kit. (PS 8876 - purchased separately) Complete this step prior to attaching Tunnel to the tower. Continue with the rest of the instructions included with PS 8876 until complete. HW 1611 FC 3108 FC 3108...
Page 61
Anchoring- Bronze Only ³ ₈" x 1" hex bolt HW 1219 Playset Anchor C/," x 1Z/x" FC 3217 ³ ₈" x 3" lag screw HW 1219 SCREW LAG HDG 3/8 X 1 1/2 HW 1301 (6) C/," FC 3217 ³ ₈" washer...
Page 62
Anchoring- Silver Only ³ ₈" x 1" hex bolt HW 1219 Playset Anchor C/," x 1Z/x" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 ³ ₈" x 3" lag screw FC 3217 HW 1301 (6) C/," FC 3217 ³ ₈" washer...
Page 63
Anchoring- Gold Only ³ ₈" x 1" hex bolt HW 1219 Playset Anchor C/," x 1Z/x" ³ ₈" x 3" lag screw HW 1219 SCREW LAG HDG 3/8 X 1 1/2 FC 3217 HW 1301 (7) C/," FC 3217 ³ ₈" washer...
Page 64
Safety Plaque HW 1223 #8 x B/," #8 x ⁵ ₈" truss head screw Place on Swing Beam or in prominent location on Playset. LT 7000 Sandbox Seat (Optional - Purchased Separately) FC 3173 Sand Box FC 3173 Seat HW 1212 #14 x 1¹...
Page 65
Telescope FC 3128 FC 3129 #8 x 2Z/x" HW 1204 #8 x 2¹ ₂" deck screw HW 1204 SCREW DECK GALV #8 X 2 1/2 Rope FC 3210 HW 1604 NOTE: Rope must be tight and secured at both ends.
Climbing Rocks HW 1309 Z/v" ¹ ₄" split lock x 1¹ ₄" washer ad screw Climbing Rocks HW 1217 ¹ ₄" x 1" Z/v" x 1" FC 3213 FC 3214 machine screw Climbing Rocks Climbing Rocks FC 3211 HW 1474 >/zn"...
Page 67
Slide HW 1212 #14 x 1¹ ₄" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 pan head screw Playset Anchor FC 3217 FC 3217 HW 1536 C/," x 1Z/v" 1" ³ ₈" x 1¹ ₄" hex bolt (1) HW 1411 ³...
Need help?
Do you have a question about the Plateau Gold and is the answer not in the manual?
Questions and answers