Table of Contents
Advertisement
5. Attach the rear alignment plate (Item 6) to the rear rack posts with M6 screws (Item
6.
7.
8.
42
NE10032O Installation Guide
3), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/‐ 0.1 Nm (50
inch‐pounds).
4
3
If installing the 1U air‐duct option, see the instruction on page
Connect all external cables in accordance with the "Cabling Guidelines" on
page
32.
Initialize the switch. See Chapter
6
5, "Initializing the NE10032O".
43.
Advertisement
Table of Contents
