Table of Contents
Advertisement
Micro-USB Port
22
NE10032O Installation Guide
The micro‐USB Type A port enables you to connect a USB drive to the switch. You
can copy files from the switch to the USB drive, or from the USB drive to the switch.
You can also start the switch using files on the USB drive.
A micro‐USB Type A to USB Type A data cable is provided with switch. It can be
used to connect an USB drive to the switch.
The supported file system formats for USB drives are FAT32 and NTFS (read‐only).
Note: When using a NTFS formatted USB drive, copying operations are limited to
read‐only. Files can be copied from the USB drive to the switch, but copying files to
the NTFS formatted USB drive results in failure.
Advertisement
Table of Contents
