Aspect - Canon WUX5000 User Commands

ASPECT

Screen settings
Format
ASPECT=<Screen setting parameters:ID>
GET□ASPECT / ?△ASPECT
<Screen setting parameters:ID>
AUTO
4:3
16:9
ZOOM
TRUE
FULL
Environment
Power
OFF ON PM Parameter D-RGB A-RGB
X O X AUTO
4:3
16:9
ZOOM
TRUE
FULL
*1 Valid when screen aspect (16:9 or 16:9 DIS) and SD signals
*2 Progressive allowable (however, 1080p is non-allowable)
*3 Allowable / Non-Allowable differs according to selected input signal
*4 Settable when screen aspect (16:10)
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or '
GET ASPECT ?ASPECT
'g:ASPECT=<Screen setting parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen sizes.
(2) This command functions in the same way as when "Display settings" - "Aspect" are selected on
the menu.
(3) If the command cannot be supported, '
(4) If the necessary signals are not input, '
(5) The final screen settings are retained even when the power is turned off. However, the screen
settings may be different if the input terminal or input signal is changed.
(6) The GET command can be used to retrieve the current screen display mode. ("
Auto
4:3
16:9
Zoom
Real
Full screen
Input
HDMI
○ ○ ○
○ ○ ○
○ ○ ○
× ×
*1
○ ○
*2
×
*4 *4
', current screen display mode is returned as
INVALID_SOURCE
NO_SIGNAL
- 19 -
WUX5000 / WUX4000 User Commands
None
*3
*3
*3
*3
*3
×
' is returned as an error response.
' is returned.
")
GET ASPECT