Blank - Canon WUX5000 User Commands

BLANK

BLANK function
Format
BLANK=<BLANK parameter:ID>
GET□BLANK / ?△BLANK
<BLANK parameter:ID>
ON
OFF
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or '
GET BLANK ?BLANK
' '
g:BLANK=ON
' '
g:BLANK=OFF
For details on other responses, refer to the "Error List".
Description
(1) This command is used to set the BLANK function.
(2) This command is identical to pressing the "BLANK" button on the remote control.
(3) Executing this command in a FREEZE status will cancel the FREEZE status and become
BLANK.
(4) The current BLANK settings can be obtained using the GET command. ("
Example
Setting
>
BLANK=ON
<
i:OK
Reference
>
GET BLANK or ?BLANK
<
g:BLANK=ON
* Commands are indicated by ">", and responses are indicated by "<".
BLANK ON
BLANK OFF
Input
A-RGB COMP HDMI None
-
', current BLANK status is returned as
Set to "User" screen when screen is BLANK.
The current BLANK status is referenced.
- 24 -
WUX5000 / WUX4000 User Commands
GET BLANK
")