Sel - Canon WUX5000 User Commands

SEL

Input signal selection
Format
SEL=<Input signal selection parameter:ID>
GET□SEL / ?△SEL
<Input signal selection parameter:ID>
AUTO
Environment
Power
OFF ON PM D-RGB
X O X X
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or ' ', current input signal is returned as
GET SEL ?SEL
'g:SEL=<Detected input signal:ID>'
(Refer to "Description".)
For details on other responses, refer to the "Error List".
Description
(1) This selects the input signal.
(2) This command functions in the same way as when "Display setting" - "Input signal selection" -
"AUTO" are selected on the menu.
(3) If the input is not "COMP", '
(4) If signals are not input, '
(5) The current input signal can be acquired using the applicable GET command. ("
List of signals which can be detected
Parameter
1080p
1080i Includes 540p (1080i non-interlaced signal)
1035i
720p
576p
480p
576i
480i
Example
Setting
> SEL=AUTO
< i:OK
Reference
> GET SEL or ?SEL
< g:SEL=1080p
* Commands are indicated by ">", and responses are indicated by "<".
Auto
Input
A-RGB COMP HDMI None
X O X
e:200X INVALID_SOURCE(***)
' is returned.
e:2010 NO_SIGNAL
Remarks
This sets the input signal selection to "AUTO".
This retrieves the input signal.
- 62 -
WUX5000 / WUX4000 User Commands
X
' is returned as an error response.
")
GET SEL