Imageflip - Canon WUX5000 User Commands

IMAGEFLIP

Flip display
Format
IMAGEFLIP=<Image flip setting parameters:ID>
GET□IMAGEFLIP /
<Image flip setting parameters:ID>
NONE
CEILING
REAR
REAR_CEILING
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or '
GET IMAGEFLIP ?IMAGEFLIP
'g:IMAGEFLIP=<Image flip setting parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to flip the screen display in various ways (vertically or horizontally).
(2) This command functions in the same way as when "Display setting" - "Flip display" are
selected on the menu.
(3) When the display is flipped, the "keystone distortion" settings are initialized.
(4) The current flip display status can be acquired using the applicable GET command. ("
")
IMAGEFLIP
Example
Setting
> IMAGEFLIP=REAR
< i:OK
Reference
> GET IMAGEFLIP or ?IMAGEFLIP
< g:IMAGEFLIP=REAR_CEILING
* Commands are indicated by ">", and responses are indicated by "<".
?△IMAGEFLIP
None
Ceiling
Rear projection
Rear projection with ceiling
Input
A-RGB COMP HDMI None
-
', current flip display setting is returned as
This displays the image in a rear projection (flip vertically).
This retrieves the flip display state.
- 43 -
WUX5000 / WUX4000 User Commands
GET