Dzoom_Pos - Canon WUX5000 User Commands

DZOOM_POS

DZOOM position setting
Format
DZOOM_POS=<DZOOM position X:Number>,<DZOOM position Y:Number>
GET□DZOOM_POS /
<DZOOM position X / Y:Number> is a signed integer indicating the central position of the enlarged input image.
Environment
Power
OFF ON PM D-RGB
X O X O
Response
"i:OK" is returned when the DZOOM position setting was completed successfully.
For ' ' or '
GET DZOOM_POS ?DZOOM_POS
'
g:DZOOM_POS=<DZOOM position X:Number>,<DZOOM position Y:Number>
For details on other responses, refer to the "Error List".
Description
(1) This command is used to set the DZOOM position (center position of the displayed enlarged
input image).
(2) This command is identical to pressing the arrow keys to move while DZOOM is enabled,
however, the position can be specified in more detail.
(3) If a position outside the range is specified, the position is automatically moved to the nearest
position within the range.
(4) 0 for <DZOOM position X / Y:Number> indicates the center position of the input image.
(5) Positive direction for <DZOOM position X / Y:Number> corresponds to RIGHT and UP keys,
and negative direction corresponds to LEFT and DOWN keys.
(6) The numerical value for <DZOOM position X / Y:Number> represents units in pixels of the
input image.
* For example, in a case where an input image of XGA (1024 x 768) size is enlarged twice the
size (range of 512 x 384 is displayed), up to ±256 for <DZOOM position X:Number>, and up to
±192 for <DZOOM position Y:Number> can be specified.
Example
Control
> DZOOM_POS=100,200
< i:OK
Reference
> GET DZOOM_POS or ?DZOOM_POS
< g:DZOOM_POS=100,200
* Commands are indicated by ">", and responses are indicated by "<".
?△DZOOM_POS
Input
A-RGB COMP HDMI None
O O O
', the current DZOOM position is returned as
This sets the DZOOM position shifted 100 right and 200 up.
This retrieves the total number of dots.
- 30 -
WUX5000 / WUX4000 User Commands
X
'