Commands
Transmissions sent from the PC to the projector.
Transmission format
△<Command character strings> △<Delimiter>
<Command character strings>
Character strings consisting of 0 or more alphanumeric characters.
<Delimiters>
One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h)
Type
Type
Null Commands
Character string
Control command
Character string
Setting command
Character string
Reference
command
Character string
Possibilities of responses from the projector ■: possible, □: not possible
Commands with a command character string length of 0. No command
processing is performed.
<Null command character string>
:= <Character string with length 0>
Projector control command. The format is shown below.
<Control command character string>
:= <Control name>[□<Parameter value>]
Command that sets values for each parameter. The format is shown
below.
<Setting command character strings>
:= <Parameter name>△=△<Parameter value>
For the definition of <Parameter value>, refer to the parameter
definitions.
Requests current value of each parameter. The format is shown below.
<Reference command character string>
:=?△<Parameter name> | GET□<Parameter name>
- 5 -
WUX5000 / WUX4000 User Commands
Description
Response
■
OK
□
BUSY
■
WARN
■
ERR
■
OK
■
BUSY
■
WARN
■
ERR
■
OK
■
BUSY
■
WARN
■
ERR
□
OK
■
BUSY
■
WARN
■
ERR