Connection Settings - Nokia E Series User Manual

Settings
To set the default call type, select
and select Voice call if you make a GSM calls, or
call if you make net calls.
To send a text message automatically to the person who is
calling you informing why you cannot answer the incoming
call, select Call Reject call with SMS
>
for the message, select Call
To set off the contact search on the home screen, select
Contact search > Off.
Network settings
Select Menu Tools
> >
To select the network mode, select
mode, UMTS, or GSM. In the dual mode, the device switches
automatically between networks.
Tip: UMTS enables faster data transfer, but may
increase the demand on battery power and reduce the
battery life. In regions close to both GSM and UMTS
networks, selecting
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select
Manual to choose from available networks, or
have the device select the network automatically.
To set the device to indicate when it is used in Micro Cellular
Network (MCN), select Cell info display
90
Call Default call type
>
Internet
> Yes. To set the text
Message text.
>
Settings Phone > Network.
>
Network mode
Dual mode may cause constant
Operator selection
Automatic
> On.

Connection settings

Select Menu
Access points
Select Menu
Call
points.
>
An internet access point is a collection of settings, which
define how the device creates a data connection to the
network. To use e-mail and multimedia services or to browse
web pages, you must first define access points for these
services.
Some or all access points may be preset for your device by
and Dual
your service provider, and you may not be able to create, edit,
or remove them.
To create a new access point, select
point or select an existing access point from the list and then
Options
>
as a basis for the new one.
Packet data (GPRS) settings
and
to Select Menu
data.
Your device supports packet data connections, such as GPRS
in the GSM network. When you are using your device in GSM
and UMTS networks, it is possible to have multiple data
connections active at the same time; access points can share
Tools Settings > Connection.
> >
Tools Settings
> > >
Options
Duplicate access point
Tools Settings
> > >
Connection Access
>
New access
>
to use the access point
Connection Packet
>