Nokia E Series User Manual page 85

reader does not support 1D codes. The Barcode reader uses
the camera in your device to scan codes.
To scan a code, select Scan
in the viewfinder, the decoded information appears on the
display. To scan a code that is located at some distance from
your device, deactivate the close-up mode by selecting
Options Deactiv. close-up
>
To save the scanned data, select
is saved in the BCR file format.
To save scanned data to Contacts, select
Contacts or Save business
are saving. If the data you scanned includes a mobile phone
number or an e-mail address, you can call or send a message
to the number or send an e-mail to the address by selecting
Options Call or Options
>
you scanned includes a URL link, you can open it by selecting
Options Open link.
>
To view previously saved, decoded information, select
data in the main view.
code. After a valid code is detected
mode.
Options > Save. The data
Options
>
card, depending on the data you
Create message:. If the data
>
Add to
Saved
Security and data management
85