Nokia E Series User Manual page 56

Travelling
point later, select Options
Internet Default access
>
About Maps
To connect to the internet automatically when you start
Maps, select Options
>
Go online at start-up > Yes.
To prevent automatic downloading of maps, select
Options Tools Settings
> >
start-up > Never.
To set the device to ask your permission before connecting
to the internet, select Options
Internet Go online at start-up
>
To be informed when your device registers to a network other
than your home network, select
Settings Internet
> >
only when you are online). For details and roaming costs,
contact your service provider.
Tip: To avoid data transfer costs, you can also use Maps
without an internet connection, and browse the maps
that are saved in your device or memory card.
Almost all digital cartography is inaccurate and incomplete
to some extent. Never rely solely on the cartography that you
download for use in this device.
Move on a map
The map coverage varies by country and region.
56
Tools Settings
> >
point.
Tools Settings Internet
> >
Internet Go online at
> >
Tools Settings
> >
Always ask.
>
Options Tools
>
Roaming warning On
>
When you open Maps, the capital of the country you are in or
>
the location that was saved from your last session is shown.
The map of the location is also downloaded, if needed.
To zoom in to your GPS position or your last known location,
press the function key and 0.
When the GPS connection is active,
>
location on the map.
To move on the map, scroll up, down, left, or right with the
scroll key. The map is oriented towards north by default.
To zoom in and out on the map, press the function key and
*, or the function key and #.
When you browse the map on the display, a new map is
>
automatically downloaded if you scroll to an area which is
not covered by maps already downloaded. These maps are
free of charge, but downloading may involve the
>
transmission of large amounts of data through your service
(shown
provider's network. For more information on data
transmission charges, contact your service provider. The
maps are automatically saved in the device memory or on a
compatible memory card (if inserted).
Display indicators
The GPS indicator
the display shows the availability and strength of the satellite
signal. One bar is one satellite. When the device tries to find
a satellite, the bar is yellow. When the device receives enough
data from the satellite to establish a GPS connection, the bar
shows your current
on the bottom right corner of