Connection Settings - Nokia E55-1 User Manual

Network settings
Select Menu Ctrl. panel
>
Network.
To select the network mode, select
and Dual mode, UMTS, or GSM. In dual mode, the
device switches automatically between networks.
Tip: Selecting
but may increase the demand on battery power
and reduce the battery life. In regions close to
both GSM and UMTS networks, selecting
mode may cause constant jumping between the
two networks, which also increases the demand
on battery power.
To select the operator, select
Manual to select from available networks, or
Automatic to set the device to select the network
automatically.
To set the device to indicate when it is used in a
microcellular network (MCN), select
display > On.

Connection settings

Select Menu Ctrl. panel
>
Connection.
Select from the following:
Bluetooth — Edit the Bluetooth settings.
•
USB — Edit the data cable settings.
•
Destinations
•
140
points. Some or all access points may be preset for
Settings and
>
Network mode
UMTS enables faster data transfer,
Operator selection
Cell info
Settings and
>
— Set up new or edit existing access
your device by your service provider, and you may
not be able to create, edit, or remove them.
Phone
VPN — Manage the settings for virtual private
•
>
networking.
Packet data
•
is attached, and enter the default packet switched
access point name if you use your device as a
modem for a computer.
Wireless LAN
•
indicator when a wireless LAN (WLAN) is available,
and define how often the device searches for
Dual
networks.
Video sharing
•
SIP profile for video sharing, and define the video
saving settings.
SIP settings
and •
protocol (SIP) profiles.
XDM profile
•
profile is required for many communications
applications, for example, presence.
Presence
•
service). To register for the service, contact your
service provider.
Remote drives
•
drive.
Configurations
•
from which your device may receive configuration
settings.
APN control
•
— Define when packet data network
— Set the device to display an
— Enable video sharing, select the
— View or create session initiation
— Create an XDM profile. The XDM
— Edit the settings for presence (network
— Connect the device to a remote
— View and delete trusted servers
— Restrict packet data connections.