Nokia E Series User Manual page 73

search for more Bluetooth devices, select
devices.
6. Select the device with which you want to connect. If the
other device requires pairing before data can be
transmitted, you are asked to enter a passcode.
When the connection has been established,
shown.
The Sent folder in the Messaging application does not store
messages sent using Bluetooth connectivity.
To receive data using Bluetooth, select
My phone's visibility
>
a non-paired device or Hidden
device only. When you receive data through Bluetooth,
depending on the settings of an active profile, a tone sounds,
and you are asked if you want to accept the message in which
the data is included. If you accept, the message is placed in
the Inbox folder in the Messaging application.
Tip: You can access the files in the device or on the
memory card using a compatible accessory that
supports the File Transfer Profile Client service (for
example, a laptop computer).
A Bluetooth connection is disconnected automatically after
sending or receiving data. Only Nokia PC Suite and some
enhancements such as headsets may maintain a connection
even if not actively used.
Pair devices
Open the paired devices tab.
Sending data
Bluetooth
Shown to all to receive data from
to receive data from a paired
More Before pairing, decide on your own passcode (1-16 digits),
and agree with the user of the other device to use the same
code. Devices that do not have a user interface have a fixed
passcode. You need the passcode only when you connect the
devices for the first time. After pairing, it is possible to
authorise the connection. Pairing and authorising the
is
connection makes connecting quicker and easier, as you do
not have to accept the connection between paired devices
every time you establish a connection.
The passcode for remote SIM access must have 16 digits.
On and
1. Select Options
>
to search for Bluetooth devices within range. If you have
sent data using Bluetooth before, a list of the previous
search results is displayed. To search for more Bluetooth
devices, select
2. Select the device with which you want to pair, and enter
the passcode. The same passcode must be entered to the
other device as well.
3. Select Yes
and the other device automatic, or
connection manually every time a connection attempt is
made. After pairing, the device is saved to the paired
devices page.
To give a nickname to the paired device, select
Assign short
device.
To delete a pairing, select the device whose pairing you want
to delete and
Options
>
New paired device. The device starts
>
More devices.
to make the connection between your device
name. The nickname is only displayed in your
Options > Delete. To delete all pairings, select
Delete all. If you are currently connected to a
Connectivity
No to confirm the
Options
>
73