Nokia E Series User Manual page 91

a data connection, and data connections remain active, for
example, during voice calls. See "Connection
manager", p. 77.
To define the packet data settings, select
connection and select When available
device to the packet data network when you switch the
device on in a supported network, or
establish a packet data connection only when an application
or action requires it. Select
point name provided by your service provider to use the
device as a packet data modem to your computer. To use a
high-speed data connection, select
access > Enabled.
These settings affect all access points for packet data
connections.
WLAN settings
Select Menu Tools
> >
Wireless LAN.
To have an indicator displayed when there is a WLAN
available in your current location, select
availability > Yes.
To select the interval for your device to scan for available
WLANs and update the indicator, select
This setting is not available unless you select
availability > Yes.
Packet data
to register the
When needed
Access point and enter the access
High speed packet
Settings Connection
>
Show WLAN
Scan for networks.
Show WLAN
WLAN security settings
Select Menu
points Options
>
point and Options
In the access point settings, select
the desired mode.
to
Session initiation protocol (SIP)
settings
Select Menu
settings.
Session initiation protocols (SIP) are used for creating,
modifying, and terminating certain types of communication
sessions with one or more participants (network service).
Typical communication sessions are video sharing and net
calls. SIP profiles include settings for these sessions. The SIP
>
profile used by default for a communication session is
underlined.
To create a SIP profile, select
Use default profile
To select the SIP profile you want to use by default for
communication sessions, select
Edit SIP profiles
Select Options
Tools Settings
> > >
New access point, or select an access
>
> Edit.
WLAN security mode
Tools Settings
> > >
Options
or Use existing profile.
Options
> Edit, and select from the following:
Settings
Connection Access
>
and
Connection SIP
>
New SIP profile
> >
Default profile.
>
91