Controls - Toro Workman GTX Operator's Manual

Controls

1. Light switch
2. Hour meter
3. Battery-discharge indicator
4. Horn button (International models only)
5. Gear-shift selector
6. Key switch
Accelerator Pedal
Use the accelerator pedal
speed of the machine. Pressing down the accelerator
pedal starts the machine. Pressing the pedal farther
increases ground speed. Releasing the pedal slows
the machine, and the machine shuts off.
The maximum forward speed in performance mode is
26 km/h (16 mph) as shown in
The maximum forward speed in economy mode is 19
km/h (12 mph) as shown in
(Figure 6) to vary ground
Figure 9.
Figure 9.
Figure 6
7. Parking-brake lever
8. Brake pedal
9. Accelerator pedal
10. USB power point
11. Status-indicator light
Brake Pedal
Use the brake pedal to stop or slow the machine
(Figure 6).
CAUTION
Operating a machine with worn or incorrectly
adjusted brakes can may result in personal
injury.
If brake pedal travels to within 25 mm (1 inch)
of the machine floorboard, adjust or repair the
brakes.
15
g034161