Texas Instruments LMK04805B User Manual
  1. Manuals
  2. Brands
  3. Texas Instruments Manuals
  4. Motherboard
  5. LMK04805B
  6. User manual

Texas Instruments LMK04805B User Manual

Lmk048 series
Hide thumbs Also See for LMK04805B:
Table of Contents

Advertisement

Quick Links

Download this manual
LMK048xx Evaluation Board
User's Guide
November 2013
SNAU158

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LMK04805B and is the answer not in the manual?

Questions and answers

Related Manuals for Texas Instruments LMK04805B

Summary of Contents for Texas Instruments LMK04805B

  • Page 1 LMK048xx Evaluation Board User's Guide November 2013 SNAU158...
  • Page 2 Low-Noise Clock Jitter Cleaner with Dual Loop PLLs Evaluation Board Operating Instructions SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 3: Table Of Contents

    APPENDIX B: TYPICAL PHASE NOISE PERFORMANCE PLOTS ....................39 PLL1 ......................................39 122.88 MHz VCXO Phase Noise ............................39 Clock Output Measurement Technique ..........................40 Buffered OSCout Phase Noise .............................. 40 November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 4 APPENDIX G: EVM SOFTWARE AND COMMUNICATION: INTERFACING UWIRE ..............76 APPENDIX H: TROUBLESHOOTING INFORMATION ........................ 78 ..............................78 ONFIRM OMMUNICATIONS PLL1 ............................. 78 ONFIRM OPERATION LOCKING PLL2 ............................. 79 ONFIRM OPERATION LOCKING SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 5: General Description

    General Description The LMK048xx Evaluation Board simplifies evaluation of the LMK048xxB Low-Noise Clock Jitter Cleaner with Dual Loop PLLs. Texas Instruments Incorporated’s CodeLoader software can be used to program the internal registers of the LMK048xxB device through the USB2ANY-uWire interface. The CodeLoader software will run on a Windows 7 or Windows XP PC and can be downloaded from http://www.ti.com/tool/codeloader/.

  • Page 6: Quick Start

    Program with CodeLoader (Default) Be sure to press ‘Ctrl - L’ Reference For interfacing the board please see Appendix G Laptop or PC Figure 1: Quick Start Diagram SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 7: Default Codeloader Modes For Evaluation Boards

    The next section outlines step-by-step procedures for using the evaluation board with the LMK04808B. For boards with another part number, make sure to select the corresponding part number under the “Device” menu. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 8: Example: Using Codeloader To Program The Lmk04808B

    For this example, the LMK04808B is chosen. Selecting the device does cause the device to be programmed. Figure 3 – Selecting the LMK04808B device SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 9: Restoring A Default Mode

    This is important because when CodeLoader is closed, it remembers the last settings used for a particular device. Again, remember to press Ctrl+L as the first step after loading a default mode. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 10: Visual Confirmation Of Frequency Lock

    A balun may also be used. Ensure CLKoutX and CLKoutX* states are Figure 7: Setting LVCMOS modes SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 11 5. The phase noise may be measured with a spectrum analyzer or signal source analyzer. See Appendix B: Typical Phase Noise Performance Plots for phase noise plots of the clock outputs. Texas Instruments Incorporated’s Clock Design Tool can be used to calculate divider values to achieve desired clock output frequencies. See: http://www.ti.com/tool/clockdesigntool.

  • Page 12: Pll Loop Filters And Loop Parameters

    The following tables contain the parameters for PLL1 and PLL2 for each oscillator option. Texas Instruments Incorporated’s Clock Design Tool can be used to optimize PLL phase noise/jitter for given specifications. See: http://www.ti.com/tool/clockdesigntool/.

  • Page 13: Pll2 Loop Filter

    Bandwidth Note: PLL Loop Bandwidth is a function of K, Kvco, N as well as loop components. Changing K and N will change the loop bandwidth. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 14: Evaluation Board Inputs And Outputs

    All LVPECL clock outputs are source-terminated using 240-ohm resistors. If an output pair is programmed to LVCMOS, each output can be independently configured (normal, inverted, or off/tri-state). SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 15 On-board LDO regulators and 0  resistor options provide flexibility to supply and route power to various devices. See schematics for more details. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 16 Populated: Power, VccVCXO/Aux input can power these circuits directly VccVCXO/Aux Input or supply the on-board LDO regulators. 0 Ω resistor options provide flexibility to route power. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 17 CodeLoader:  MODE = (3) Dual PLL, Ext VCO (Fin), (5) Dual PLL, Ext VCO, 0-Delay, (11) PLL2, Ext VCO (Fin) November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 18 The programmable logic I/O signals accessible through CLKuWIRE_TP this header include: SYNC, Status_Holdover, LEuWIRE_TP Status_LD, Status_CLKin0, and Status_CLKin1. These logic I/O signals also have dedicated SMAs and test points. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 19 Note: Before a high-frequency internal signal (e.g. PLL divider output signal) is selected by HOLDOVER_MUX, it is suggested to first remove the 270 ohm resistor to prevent the LED from loading the output. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 20 Status_CLKinX pin can be programmed on the Bits/Pins tab via the Status_CLKinX_MUX control. Refer to the LMK04800 Family Datasheet section “Status Pins” for more information. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 21 When SYNC_MUX is 3 to 6 (pin enabled as output), a status signal for the SYNC pin can be selected on the Bits/Pins tab via the SYNC_MUX control. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 22: Recommended Test Equipment

    50-ohm cables to minimize external sources of skew or other errors/distortion that may be introduced if using oscilloscope probes. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 23: Programming 0-Delay Mode In Codeloader

    PLL1 VCO and PLL2 reference frequency are mismatched and the one or more of the PLLs are out of lock. While there still could be an error in the November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 24 CLKout8 Divide Actual CLKout8 245.76 MHz 122.88 MHz 245.76 MHz 61.44 MHz Output Frequency Reported CLKotu8 245.76 MHz 122.88 MHz 245.76 MHz 61.44 MHz Output Frequency SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 25: Single Loop 0-Delay Mode Examples

    1 to 2 to reduce the PLL2 phase detector frequency from 122.88 MHz to 61.44 MHz. Now the adjusted VCO frequency can be programmed to allow PLL2 to lock. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 26 Bypassed Bypassed CLKout8 Divide Actual CLKout8 245.76 1474.56 MHz 245.76 MHz 61.44 MHz Output Frequency Reported CLKout8 245.76 1474.56 MHz 40.96 MHz 2.56 MHz Output Frequency SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 27: Appendix A: Codeloader Usage

    The Pin Configuration field is hardware dependent and normally does not need to be changed by the user. Figure 8 shows the default settings. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 28: Clock Outputs Tab

    This tab also allows the user to select the VCO Divider value (2 to 8). Note that the total PLL2 N divider value is the product of the VCO Divider value and the PLL N Prescaler and N Counter SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 29 PLL(s) may be out of lock, as highlighted by the red box in Figure 10. Figure 10: Warning message indicating mismatch between PLL1 VCO frequency (30.72MHz) and PLL2 reference frequency (122.88 MHz) November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 30: Pll1 Tab

    (MHz) This value is calculated as: PLL1 PDF = CLKin Frequency / (PLL1_R * CLKinX_PreR_DIV), where CLKinX_PreR_DIV is the predivider value of the selected input clock. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 31: Setting The Pll1 Vco Frequency And Pll2 Reference Frequency

    PLL2 tab should be 122.88 MHz (VCXO frequency). Because of the mismatched frequencies, a warning message will indicate this condition on the Clock Outputs tab but may be disregarded in a case like this. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 32: Pll2 Tab

    PLL2 R Counter value (1 to 4095). N Counter PLL2_N PLL2 N Counter value (1 to 262143). PLLN Prescaler PLL2_P PLL2 N Prescaler value (2 to 8). SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 33: Bits/Pins Tab

    TIP: Right-clicking any register name in the Bits/Pins tab will display a Help prompt with the register address, data bit location/length, and a brief register description. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 34 Sets the selected signal on the Status_LD pin. LD_TYPE Sets I/O pin type on the Status_LD pin. HOLDOVER_MUX Sets the selected signal on the Status_HOLDOVER pin. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 35 EN_VTUNE_RAIL_DET Allows rail-to-rail operation of VCXO with default of 0. Allows use of DAC_LOW_TRIP, DAC_HIGH_TRIP. Must be used with EN_MAC_DAC = 1. CLKin_SELECT_MODE must be 4 or 6 (auto mode) to use. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 36 Unique divides on individual CLKinX signals allows switchover from one clock input to another clock input without needing to reprogram the PLL1_R divider to keep the device in lock. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 37 Enable this bit when using a PLL2 phase detector frequency > 100 MHz. SYNC Sets these pins on the uWire header to logic high (checked) or logic low (unchecked). Program Pins Status_CLKin0 Status_CLKin1 November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 38: Registers Tab

    By clicking in the “bit field” it is possible to manually change the value of registers by typing ‘1’ and ‘0.’ SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 39: Appendix B: Typical Phase Noise Performance Plots

    PLL1 while retaining the frequency accuracy of the reference clock input. This VCXO sets the reference noise to PLL2. Figure 15 shows the open loop typical phase noise performance of the CVHD-950-122.88 Crystek VCXO. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 40: Clock Output Measurement Technique

    Both OSCout0 and OSCout1 frequencies are 122.88 MHz since the OSCout Divider is bypassed. OSCout0 is programmed to LVCMOS mode and OSCout1 is fixed as LVPECL. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 41: Clock Outputs (Clkout)

    -153.2 -155.3 RMS Jitter (fs) 99.3 99.4 109.1 103.3 10 kHz to 20 MHz RMS Jitter (fs) 111.4 113.5 121.3 116.1 100 Hz to 20 MHz November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 42 RMS Jitter (fs) 111.8 109.6 103.9 133.4 122.1 116.1 10 kHz to 20 MHz RMS Jitter (fs) 124.3 122.1 115.4 144.4 132.3 127.9 100 Hz to 20 MHz SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 43: Lmk04808B Oscout Phase Noise

    -159.5 -156.7 20 MHz RMS Jitter (fs) 94.1 91.0 123.7 10 kHz to 20 MHz RMS Jitter (fs) 103.2 99.6 131.3 100 Hz to 20 MHz November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 44: Lmk04806B Clkout Phase Noise

    100 Hz to 20 MHz For the LMK04806B, the internal VCO frequency is 2457.60 MHz. The divide-by-10 CLKout frequency is 245.76 MHz, and the divide-by-20 CLKout frequency is 122.88 MHz. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 45 RMS Jitter (fs) 106.9 101.5 96.4 134.2 109.7 108.2 10 kHz to 20 MHz RMS Jitter (fs) 116.8 112.4 106.4 143.2 118.9 117.9 100 Hz to 20 MHz November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 46: Lmk04806B Oscout Phase Noise

    20 MHz -157.6 -159.9 -156.9 RMS Jitter (fs) 138.4 89.7 120.0 10 kHz to 20 MHz RMS Jitter (fs) 143.7 97.3 126.2 100 Hz to 20 MHz SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 47: Lmk04803B Clkout Phase Noise

    100 Hz to 20 MHz For the LMK04803B, the internal VCO frequency is 1966.08 MHz. The divide-by-8 CLKout frequency is 245.76 MHz, and the divide-by-16 CLKout frequency is 122.88 MHz. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 48 RMS Jitter (fs) 115.1 113.1 107.9 137.5 126.1 120.5 10 kHz to 20 MHz RMS Jitter (fs) 126.4 124.2 116.7 147.5 136.4 128.9 100 Hz to 20 MHz SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 49: Lmk04803B Oscout Phase Noise

    -159.4 -157.0 20 MHz RMS Jitter (fs) 107.1 92.4 119.1 10 kHz to 20 MHz RMS Jitter (fs) 111.6 98.1 123.3 100 Hz to 20 MHz November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 50: Appendix C: Schematics

    You should completely validate and test File: Power.SchDoc http://www.national.com your design implementation to confirm the system functionality for your application. Contact: http://www.national.com/support © Copyright, National Semiconductor, 2009 SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 51: Lmk048Xxb Device With Loop Filter And Crystal Circuits

    You should completely validate and test File: LMK048xx_PLL.SchDoc http://www.national.com your design implementation to confirm the system functionality for your application. Contact: http://www.national.com/support © Copyright, National Semiconductor, 2009 November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 52: Reference Inputs (Clk In 0 & Clk In 1), External Vcxo (Osc In ) & Vco Circuits , And Osc Out 1 Output

    You should completely validate and test File: InClks.SchDoc http://www.national.com your design implementation to confirm the system functionality for your application. Contact: http://www.national.com/support © Copyright, National Semiconductor, 2009 SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 53: Clock Outputs (Osc Out 0, Clk Out To Clk Out 3)

    You should completely validate and test File: OutClks0.SchDoc http://www.national.com your design implementation to confirm the system functionality for your application. Contact: http://www.national.com/support © Copyright, National Semiconductor, 2009 November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 54: Clock Outputs (Clkout4 To Clkout7)

    You should completely validate and test File: OutClks1.SchDoc http://www.national.com your design implementation to confirm the system functionality for your application. Contact: http://www.national.com/support © Copyright, National Semiconductor, 2009 SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 55: Clock Outputs (Clkout8 To Clkout11)

    You should completely validate and test File: OutClks2.SchDoc http://www.national.com your design implementation to confirm the system functionality for your application. Contact: http://www.national.com/support © Copyright, National Semiconductor, 2009 November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 56: Uwire Header, Logic I/O Ports And Status Leds

    You should completely validate and test File: LogicIO.SchDoc http://www.national.com your design implementation to confirm the system functionality for your application. Contact: http://www.national.com/support © Copyright, National Semiconductor, 2009 SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 57: Usb Interface

    You should completely validate and test File: onboard_usb.SchDoc PADC: PRJ_PADC http://www.national.com your design implementation to confirm the system functionality for your application. Contact: http://www.national.com/support © Copyright, National Semiconductor, 2009 November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 58: Appendix D: Bill Of Materials

    R74, R82, R84, R229, R304, R327, R329, R331, R333, R337, R340, R341, R346, R347, R349, R353, R354, R358, R361, R364, R365, R368, R371, R373, R374, R375, R400, R402 SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 59 CAP, CERM, 82pF, 50V, +/-10%, C0G/NP0, 0603 Kemet C0603C820K5GACTU C10, C29, C32, CAP, CERM, 2200pF, 50V, +/-10%, X7R, 0603 Kemet C0603C222K5RACTU C341 CAP, CERM, 10µF, 10V, +/-20%, X5R, 0805 Kemet C0805C106M8PACTU November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 60 CAP, CERM, 1uF, 16V, +/-10%, X5R, 0603 Kemet C0603C105K4PACTU C413, C415 CAP, CERM, 0.01uF, 50V, +/-5%, X7R, 0603 Kemet C0603C103J5RACTU Cb1_B1 CAP, CERM, 0.33uF, 16V, +/-10%, X7R, 0603 Kemet C0603C334K4RACTU SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 61 RES, 100 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW0603100RJNEA R18, R336, R342, FB, 1000 ohm, 600 mA, 0603, Ferrite Murata BLM18HE102SN1D R343 RES, 18 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060318R0JNEA November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 62 RES, 47k ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060347K0JNEA Rb2_B1 RES, 3.9k ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW06033K90JNEA S1, S2, S3, S4, S5, 0.875" Standoff VOLTREX SPCS-14 LMK04800 Texas Instruments LMK048xxBISQ SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 63 C39, C40, C333, Technology, Dielectric, xxV, xx% DNP_CAP Cb1_VCO, Cb2_B1, Cb2_VCO, Cb2pVCO C316, C320, C327, CAP, CERM, 0.1uF, 16V, +/-5%, X7R, 0603 Kemet C0603C104J4RACTU C328, C332, C334, C336 November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 64 Diode, Zener, 3.3V, 150mW, SOD-523F Comchip Technology CZRU52C3V3 GND_TP, Vcc_TP DNP_TP HWB, RESET APEM Components, ADTSM31NV J400 CONN RCPT MINI USB2.0 5POS SMD Hirose Electric Co. Ltd. UX60SA-MB-5ST SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 65 R179, R187, R204, R209, R225, R376 R6, R7, R15, R17, RES, 270 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW0603270RJNEA R31, R32, R39, R40, R49, R50, R79, R314 November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 66 CRCW060382R0JNEA R95, R98, R101, R116, R118, R120, R123, R137, R140, R144, R146, R160, R162, R166, R168, R181, R184, R186, R189, R203, R205, R208, R211, R224, R227 SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 67 R403, R406, R408, RES, 33 ohm, 5%, 0.1W, 0603 Vishay-Dale CRCW060333R0JNEA R409, R410 CRO2949A-LF U301 3-Terminal Adjustable Regulator Texas Instruments LM317AEMP U400, Y400 Y300, Y301 DNP_XTAL November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 68: Appendix E: Pcb Layers Stackup

    FR4 (Er = 4.8) 4 mil Power plane #1 [LMK048xxENG.G2] 12.6 mil Ground plane [LMK048xxENG.GP1] 8 mil Power plane #2 [LMK048xxENG.G3] 12 mil Bottom Layer [LMK048xxENG.GBL] SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 69: Appendix F: Pcb Layout

    Appendix F: PCB Layout Layer #1 – Top November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 70: Layer #2 - Rf Ground Plane (Inverted)

    Layer #2 – RF Ground Plane (Inverted) SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 71: Layer #3 - Vcc Planes

    Layer #3 – Vcc Planes November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 72: Layer #4 - Ground Plane (Inverted)

    Layer #4 – Ground Plane (Inverted) SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 73: Layer # 5 - Vcc Planes 2

    Layer # 5 – Vcc Planes 2 November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 74: Layer #6 - Bottom

    Layer #6 – Bottom SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 75: Layers #1 And 6 - Top And Bottom (Composite)

    Layers #1 and 6 – Top and Bottom (Composite) November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 76: Appendix G: Evm Software And Communication: Interfacing Uwire

    There are two options in communicating with the uWire interface from the computer. OPTION 1 Open Codeloader.exe  Click “Select Device”  Click “Port Setup” tab  Click “LPT” (in Communication Mode) OPTION 2 SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 77 Open Codeloader.exe  Click “Select Device”  Click “Port Setup” Tab  Click “USB” (in Communication Mode) *Remember to also make modifications in “Pin Configuration” Section according to Table above. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 78: Appendix H: Troubleshooting Information

    Redesign PLL1 loop filter with higher phase detector frequency Redesign PLL1 loop filter with higher charge pump current iii. Isolate VCXO tuning input from PLL1 charge pump with an op amp. SNAU158 LMK04800 Family User’s Guide November 2013 Copyright © 2013, Texas Instruments Incorporated www.ti.com...

  • Page 79: Confirm Pll2 Operation/Locking

    5) Program LD_MUX = “PLL2 DLD” 6) Confirm the LD pin output is high. 7) Program LD_MUX = “PLL1 & PLL2 DLD” 8) Confirm the LD pin output is high. November 2013 LMK04800 Family User’s Guide SNAU158 Copyright © 2013, Texas Instruments Incorporated www.ti.com...
  • Page 80 STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein. Acceptance of the EVM is expressly subject to the following terms and conditions.
  • Page 81 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 82 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
  • Page 83 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated...
  • Page 84 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.

This manual is also suitable for:

Lmk04803bLmk04806bLmk04808b

Table of Contents