FLOJET G-57 Series Installation & Operation Instructions

Menu
INSTALLATION & OPERATION INFORMATION FOR MODELS G573XXX THROUGH G575XX

PRODUCT DATA

Pump Design ............................................Duplex Diaphragm
Wetted Parts ....Diaphragm Material Santoprene ® or Viton ®
Check Valve Seat Material Santoprene ® or Viton ®
Housing and check valve material
................Polypropylene (Glass Reinforced)
Springs ..........................................Hastelloy
Ports ......................................Gas Inlet & Outlet 1/4" (6.3 mm)
Product Inlet 3/8" (9.5 mm) - 1/2" (12.7 mm) - 3/4" (19.1 mm)
Product Outlet 3/8" (9.5 mm) - 1/2" (12.7 mm) - 3/4" (19.1 mm)
Net Weight ..............................................1.2 Pounds (0.54kg)
® A registered trade mark of Monsanto Co.
® A registered trade mark of I.E. DuPont Co.

DESCRIPTION

FLOJET Industrial G-57 Series Pumps are designed for
general commercial and industrial applications. These
pumps are constructed from a selection of materials for
handling a broad range of chemicals.
Allowed fluids for
®
Santoprene materials
Potable Water, Acids
Alkaline, Soaps
Alcohols, Ketones
Allowed fluids for
Viton ® materials
Oils, Solvents, D-Limonene,
Aromatic & Halogenated
Hydrocarbons, Acids

DIMENSIONAL DRAWING

Inches (millimeters)
Dimensional tolerances ± 0.06 inches
Consult factory if precise details are required.
Not Allowed fluids for
®
Santoprene materials
Oils, Solvents,Soaps with
Solvents, D-Limonene,
Aromatic Hydrocarbons
Not Allowed fluids for
Viton ® materials
Ketones, Acetones,
Automotive Brake Fluid,
Ammonia, Ethanol
3.21
(82)
2.20
(56)
4.52
(115)
0.71 0.92
Fluid In
(19) (23)
1.84
(47)
Industrial Air Driven Pump

PERFORMANCE SPECIFICATIONS

PUMP
Liquid Temperature Min ............................................40°F (4.4°C)
............................Max ......................................120°F (48.9°c)
Priming ..............Dry ..........................................15 ft. (4.5 m)
............................Wet ..........................................20 ft. (6.1 m)
Flow Rates ........Max ....................Up to 5 GPM (18.9 L/min)
Gas Supply Pressure ..............20 to 100 PSI (1.4 to 6.9 bar)
Noise Level ........Max ......................................................87dB
Santoprene and Viton Material with 1/2" Ports
100
(6.9)
80
(5.5)
100*
60
(4.1)
80*
40
60*
(2.8)
40*
20
(1.4)
20*
0 1.0 2.0 3.0
(3.8) (7.6) (11.4)
Flow in GPM (l/min)
*Indicates Airlet Pressure
4.58
(116)
5.81
(148)
Air Inlet
Fluid Out
G-57 Series
4.0 5.0 6.0
(15.1) (18.9) (22.7)
0.25
(6.4)
5.27
(134)
Air Exhaust
Muffler