Toro 03708 Operator's Manual page 9

93-6688
1. Warning—read the
instructions before
servicing or performing
maintenance.
20A
10A
10A
TEC-5002
7.5A
2A
120-1672
1. Starter, 20A
2. Work light, 10A
3. Seat, 10A
4. Power point, 10A
1. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
2. Warning—read the Operator's Manual before towing the
machine.
3. Tipping hazard—slow machine before turning, do not turn at
high speeds; lower the cutting unit when driving down slopes;
use a roll over protection system and wear the seat belt
2. Cutting hazard of hand or
foot—stop the engine and
wait for moving parts to
stop.
10A
10A
7.5A
7.5A 60A
120-1672
5. Gauges, 10A
6. GM4500 controller, 2A
7. Power supplied, 7.5A
8. Engine preheat, 60A
1. Stored energy hazard—read the Operator's Manual.
2. Move the cotter pin to the hole closest to the rod bracket
and then remove the lift arm and pivot yoke.
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
120-1683
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting units, stop the engine and
remove the ignition key before leaving the machine.
5. Thrown object hazard—keep bystanders a safe distance from
the machine.
6. Entanglement hazard, belt—stay away from moving parts,
keep all guards and shields in place.
9
110-9642
106-6754