Table of Contents
Advertisement
Cooling System
Maintenance
Servicing the Engine Cooling
System
Service Interval: Before each use or daily
Remove debris from the engine area, oil cooler and
radiator daily. Clean them more frequently in dirty
conditions.
1. Unlatch and swing open rear screen (Figure 76).
Clean the screen thoroughly of all debris.
Note: To remove the screen, lift off the hinge pins.
Figure 76
1. Rear screen latch
2. Rotate the latches (Figure 77) securing the oil cooler
to the frame.
1. Oil cooler latches
3. Pivot the oil cooler rearward. Clean both sides of the
oil cooler and radiator area (Figure 78) thoroughly
with compressed air. Start from the front and blow
the debris out towards the back. Then clean from
the back side and blow towards the front. Repeat
procedure several times until all chaff and debris is
removed.
1. Oil cooler
Important: Cleaning the radiator or oil cooler
with water will promote premature corrosion
damage to components and compact debris.
4. Pivot the oil cooler back into position. Secure it to
the frame with the latches, close the screen.
50
Figure 77
Figure 78
2. Radiator
Advertisement
Table of Contents
