Toro 03708 Operator's Manual page 10

*This safety decal includes a slope warning required on the machine fro compliance to the European Lawn Mower Standard EN 836.1997. The conservative maximum slope
1. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
2. Warning—read the Operator's Manual before towing the
machine.
3. Tipping hazard—do not turn at high speeds, do not up and
down slopes greater than 16 degrees, do not mow across
slopes greater than 22 degrees; lower the cutting unit when
driving down slopes; use a roll over protection system and
wear the seat belt
1. 5 Blade cutting unit
2. 8 Blade cutting unit
Affix over part no.
angles indicated for operation of this machine are prescribed by and required by this standard.
3. 11 Blade cutting unit
4. Mow and backlap
120-1686
120–1683 for CE*
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting units, stop the engine and
remove the ignition key before leaving the machine.
5. Thrown object hazard—keep bystanders a safe distance from
the machine.
6. Entanglement hazard, belt—stay away from moving parts,
keep all guards and shields in place.
120-1681
10
5. Read the Operator's Manual.
6. Machine speed