Installing A Fan Tray - Cisco Nexus 9504 Hardware Installation Manual

Installing a Fan Tray

Installing a Fan Tray
Before You Begin
• Fan tray slot is open in the chassis.
• Fan tray is available for installation.
• If you were replacing a fabric module behind the open fan tray slot, that replacement operation is
Step 1 Use both of your hands to hold the two handles on the front of the fan tray that you are installing.
Figure 14: Installing a Fan Tray in the Chassis
1 Hold the two fan tray handles with your two hands.
2 Position the back of the fan tray to the open fan tray
slot. The pins on the top and bottom of the fan tray
should align to holes in the chassis and the two sets of
rails on the top of the fan tray should align to two sets
of tracks on the top of the open slot. Slide the fan tray
all the way into the slot.
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
70
completed.
Replacing or Installing Modules, Fan Trays, and Power Supplies
3 Screw in four captive screws and tighten each screw
to 8 in-lb (0.9 N·m) of torque.