Cisco Nexus 9504 Hardware Installation Manual page 35

Nx-os mode switch

Hide thumbs Also See for Nexus 9504:

Table of Contents

Installing a Chassis

Step 1

For each power supply, connect an AC power cable to the AC power source and to the power receptacle on the power

supply.

Step 2

Verify that the Output Power LED turns on and becomes green.

What to Do Next

When the power supplies are operating and the switch is fully powered, you are ready to connect the switch

to the network.

◦ Slots 33 and 34 (labeled as PS 1 and PS 2) must be connected to one grid (Grid A)

◦ Slots 35 and 36 (labeled as PS 3 and PS 4)must be connected to another grid (Grid B)

Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide

Connecting the Switch to an AC Power Source

Table of Contents