Cisco Nexus 9504 Hardware Installation Manual page 12

Overview
The following figure shows the hardware features seen from the front of the chassis.
Figure 1: Hardware Features on the Front of the Chassis
1 Two vertical
mounting
brackets used to
mount the
chassis onto a
rack
2 I/O modules (up
to four) in slots
LC 1 to LC 4
3 Supervisor
modules (one or
two) in slots
SUP 1 and SUP
2 (identified in
CLI output as
Modules 27 and
28)
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
2
4 3-kW AC power supplies (up to two without power redundancy or up to four with
power redundancy) in slots PS 1 to PS 4
5 Chassis LEDs
6 Chassis handles (used only for positioning the chassis on the bottom support rails—do
not use these handles for lifting the chassis)
Overview