Clearance Requirements - Cisco Nexus 9504 Hardware Installation Manual

Preparing the Site
Statement 1048—Rack Stabilization
Warning
Stability hazard. The rack stabilizing mechanism must be in place, or the rack must be bolted to the floor
before you slide the unit out for servicing. Failure to stabilize the rack can cause the rack to tip over.

Clearance Requirements

You must provide the chassis with adequate clearance between the chassis and any other rack, device, or
structure so that you can properly install the chassis, route cables, provide airflow, and maintain the switch.
For the clearances required for an installation of this chassis, see the following figure.
Figure 3: Clearances Required Around the Chassis
1 Chassis 9 Rear service clearance required to replace fan
trays and fabric modules
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
Clearance Requirements
11