Siemens SINAMICS Series Operating Instructions Manual page 76

Intelligent operator panel. intelligent commissioning and application configuration tool

Hide thumbs Also See for SINAMICS Series:

Table of Contents

6.7 Know-how Protection

Setting up the exception list

As previously stated, after commissioning the Inverter and checking that parameters have

been set correctly, the number of parameters to included in the exception list must be

determined and set in parameter p7763. To set the number of parameters to be included in

the exception list the following procedure must be performed. When establishing the first

exception list, some parameters may already be entered into the exception list; under no

circumstances should you remove these parameters from the exception list as these are

essential parameters that must remain in the exception list.

Select "Menu" from the main screen.

Select "Parameters" from the menu.

Select "Search by number" from the Parameters menu.

Input "07763" then press "OK"

Operating Instructions, 04/2015, FW V1.5.1, A5E00110011C AB

Intelligent Operator Panel (IOP)

Table of Contents