Operating Instructions - Fisher & Paykel RX216DT7XV2 Installation Instructions And User Manual

Automatic ice maker
Connect the ice maker to the water supply as instructed on pages 9 – 10. Proper water flow
and a level refrigerator are essential for optimal ice maker performance.
Note: energy rating guides that are posted on the refrigerator at the time of purchase do not
include optional ice maker energy usage.

Operating instructions

To start ice making
Confirm ice storage bin is securely in place.
Lower the wire arm inside the ice bin gently.
Once the freezer compartment has reached 0°F (-18°C), the
ice maker will fill with water.
Approximately three to six hours after installation the first
batch of ice will be produced.
After the initial ice batch is made, a complete batch will be
made every two to three hours.
Discard ice made in the first 12 hours of operation.
The ice maker will continue to make ice until the ice level
raises the wire arm, and stops production.
To stop ice production
Lift the wire arm inside the ice bin until a click is heard.
The ice maker will not make or dispense ice until the arm is
lowered.
To remove the ice bin
Stop ice production by raising the wire arm.
Lift the ice bin up slightly and pull forward.
To install the ice bin
Turn the auger driver behind the ice bin a half turn
counterclockwise.
Place the bin in the rails and slide back gently.
Ice making information
The first two batches of ice may contain small or irregular cubes, due to air in the supply line.
After cubes are made, it is normal for a few cubes to be joined together. They can easily be
broken apart.
If the ice is not used frequently the cubes may become cloudy, small, stick together, and
taste stale. Empty and wash the bin in lukewarm water periodically. Dry it thoroughly before
replacing it.
The ice maker may make a few sounds during its operation. Clicking, rattling, and buzzing are
all normal.
Do not store anything in the ice bin except ice made in the ice maker.
Ice and water
Fig.19 Ice maker
(inside freezer)
Fig.20 Auger driver
25
EN