Fisher & Paykel RX216DT7XV2 Installation Instructions And User Manual page 21

Fresh food features
19
There are a number of customizable storage options throughout the compartment.
EN
Shelves
Caution!
To avoid personal injury or property damage, observe the following:
Never attempt to adjust a shelf that is loaded with food.
Ensure shelf is secure before placing items on shelf.
Handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or
exposed to sudden temperature changes.
Your refrigerator is fitted with shelves specially designed to retain spills, making clean up easier.
To remove a shelf:
Slightly tilt up the front and lift up the rear of the shelf, then pull the shelf straight out.
To install a shelf:
Tilt the front edge up and insert the hooks into the desired frame openings and let the shelf
settle into place. Be sure the shelf is securely locked at the rear.
The top of each bin serves as the shelf above it. To remove the bin top place your hand under
the frame to push the glass up. Lift glass out. To install, reverse the instructions.
Covered storage bucket (select models)
The storage bucket has a lid and removable egg tray. When the
tray is removed the bucket will fit other items, such as a standard
egg carton.
Wine bottle holder (select models)
The wine bottle holder will hold a single bottle.
Fig.10 Covered storage bucket
To install:
Slide the upper lip of the holder along the top left side of any shelf.
The bottle holder sits underneath the shelf.
Door buckets (for fresh food and freezer compartments)
Door buckets can be moved up or down to meet individual storage
needs.
To remove:
Lift the bucket up and pull straight out.
To install:
Place bucket in desired door liner retainer position and push down
Fig.11 Door bucket
gently until bucket stops.