Fisher & Paykel RX216DT7XV2 Installation Instructions And User Manual page 26

Ice and water
24
Front Fill (select models)
The FRONT FILL button (see page 22) is perfect for filling up sports bottles and large containers
that do not easily fit inside the dispensing cavity.
To dispense cubed
Select either / or
Place your glass or container against the dispensing pad and press (for crushed ice hold your
container as close to the chute as possible).
Slowly remove your glass when you have enough ice.
To dispense water and ice at the same time (select models)
Select either / or
Place your container against the dispensing pad and press.
At the same time press FRONT FILL button to dispense water.
Slowly release the FRONT FILL button and remove your glass when you have enough ice.
Note:
The ice mode may not be changed while ice dispenser is in operation.
The dispenser will automatically lock if it is active for more than five minutes. See Dispenser Lock
(page 23) for unlocking information.
Once dispensing has stopped a small amount of water may be dispensed. This will be collected
by the drip tray. Large spills should be wiped dry.
Light
A light activates within the dispenser cavity when dispensing ice or water with the back
dispensing pad or FRONT FILL button (if fitted).
On RX216CT4XV2 models press the
indicator will illuminate. This activates the dispenser light when the light sensor
AUTO LIGHT
detects the light levels in the room are low.
/ or crushed /
ice on the control panel.
/
ice.
/
button once to select the
ice
AUTO LIGHT
function and the