Advertisement
4.1 INSTAllATION Of THE ANTENNA
1. Turn on your TV set and turn on your Digital Terrestrial Receiver.
2. Press the "MENU" button on the remote control of your Digital Terrestrial Receiver. Check
in the Set-Up or Installation menu of your receiver if the antenna power is set to "ON".
(Normally this is indicated in the menu as ANT power, Ext Antenna power or Active antenna
power.) *
3. Select in the menu of your receiver the field that shows the signal level indicators. (Normally
you can find the signal meter in the Channel Scan field of the menu.)
4. Now optimise the signal strength by finding the best position for the antenna. Keep the
antenna in your hand, try to reach the highest possible position. Now slowly turn the
antenna around its axis (in the horizontal field), at the same time monitor the signal bars
in the menu. Once the signal indicator shows the maximum signal, fix the antenna on that
position.
5. It is important to place the antenna in such way that an acceptable signal level is assured.
You can optimise the signal strength by moving the antenna to different locations in your
room, for example place it near a window, or place it on a high placed book-shelf. The best
position can be found by trying different locations.
NOTE:
It is recommended NOT to place the antenna near to:
Devices that are strong source of radiation or interference such as DECT and GSM
„
„
telephones, transmitters, microwaves, etc.
Devices with high power consumption such as electrical heater, air conditioner, hairdryers,
„
„
etc.
* If you can not find this option in the menu of your Digital Terrestrial Receiver, please check in your user manual if your receiver supports active antenna power
(5 V DC via the RF cable). If you are not sure; please contact your dealer.
1. AC Outlet
2. AC Adaptor (DC 12 V)
(Optional)
3. Antenna (Rear view)
4. TV
5. Coaxial cable
6. HDMI cable or SCART
cable (optional)
7. Digital Set Top Box
3
Advertisement
