Executing Wsd Scan - Kyocera TASKalfa 4002i Operation Manual

Operation on the Machine > WSD Scan
2
For Windows 10
1
2

Executing WSD scan

1
2
3
4
Install the driver.
Right-click the machine's icon and then click [Install].
NOTE
If the "User Account Control" window appears, click [Continue].
If the "Found New Hardware" window appears, click [Cancel].
During the installation, double-click the icon shown on the task bar to display the "Driver
Software Installation" screen. When "Your devices are ready to use" is displayed on the
[Driver Software Installation] screen, the installation is completed.
Right-click [Start] button on the Windows and select [Control
Panel] and then [View devices and printer].
Install the driver.
Click [Add a device]. Select the machine's icon and then click [Next].
When the machine's icon is displayed in "Printers" on the [Devices and Printers] screen, the
installation is completed.
[Home] key > [Send]
Place the originals.
Loading Originals (page 5-2)
Display the screen.
Select [WSD Scan/DSM Scan].
If DSM Scan is set to [Off] in the network settings, select [WSD Scan] and go to step 4.
DSM Scan (page 8-55)
Scan the originals.
Procedure using this machine
1
[From Operation Panel] > [Next]
5-33