Loading Originals In The Document Processor - Kyocera TASKalfa 4002i Operation Manual

Operation on the Machine > Loading Originals
NOTE
• When you wish to copy the booklet which is smaller than Letter-R, align the gutter (center of booklet) to the
Statement-R of the original size indicator plates, and select [Letter-R] on OriginalSize. When you wish to copy the
booklet which is larger than Letter-R, align the gutter (center of booklet) to the Letter of the original size indicator
plates, and select [Ledger] on OriginalSize. Select [Preview] to show a preview image and adjust the gutter to right
or left to fit the image as necessary.
Original Preview (page 2-20)
• A5 is detected as A4-R. Set the paper size to A5 by using the function key on the touch panel.
Original Size (page 6-18)
• For the procedure for feeding envelopes or cardstock, refer to the following:
Loading Envelopes or Cardstock in the Cassettes (page 3-10)
Loading Envelopes or Cardstock in the Multi Purpose Tray (page 5-8)
CAUTION
Do not leave the document processor open as there is a danger of personal injury.
IMPORTANT
• Do not push the document processor forcefully when you close it. Excessive pressure may crack the platen
glass.
• When placing books or magazines on the machine, do so with the document processor in the open position.

Loading Originals in the Document Processor

The document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals are
scanned.
The document processor supports the following types of originals.
Detail Document Processor (Automatic 2-Sided)
Type DP-7100
Weight 35 to 160 g/m
Sizes Maximum A3/Ledger (11.69" × 17"/
297 × 432 mm) (Long-sized 11.69" × 74.8"/
297 × 1,900 mm) to Minimum A6-R/Statement-R
(4.13" × 5.82"/105 × 148 mm)
No. of Plain paper (80 g/m
sheets paper: 140 sheets (Mixed size originals: 30 sheets)
Thick paper (120 g/m
Art paper: 1 sheet
Do not use the document processor for the following types of originals. Otherwise, the originals may be jammed or the
document processor may become dirty.
• Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before
loading. Failure to do so may cause the originals to jam.)
• Originals with adhesive tape or glue
• Originals with cut-out sections
• Curled original
• Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam.)
2
(duplex: 50 to 120 g/m
2
), Recycled paper, Vellum
2
): 93 sheets
Document Processor (Dual scan DP)
DP-7110
2
) 35 to 220 g/m
Maximum A3/Ledger (11.69" × 17"/
297 × 432 mm) (Long-sized 11.69" × 74.8"/
297 × 1,900 mm) to Minimum A6-R/Statement-R
(4.13" × 5.82"/105 × 148 mm)
Plain paper (80 g/m
paper: 270 sheets (Mixed size originals: 30 sheets)
Thick paper (120 g/m
Art paper: 1 sheet
5-3
2
(duplex: 50 to 220 g/m
2
), Recycled paper, Vellum
2
): 180 sheets
2
)