Split Number Setting Method - Brother BAS H Series Instruction Manual

1-2-5. Split number setting method

Pattern 1
Pattern 2
Pattern 3
4964Q
[Sewing operation screen]
2nd step
1.
Touch the "Program No." △ or ▽ key (1) to select the program number which includes the split code.
・ The "Program No." value (2) will flash.
2.
Depress the foot switch to the 2nd step to carry out home position detection.
(If using a two-pedal foot switch, lower the work clamp before depressing the start switch. For the hand start switch, use
the right switch to lower the feed plate lock cylinder and work clamp, and then press the left and right switches at the same
time.)
* The feed mechanism will move to the home position and the program number will be confirmed. (The "Program No."
setting (2) will stop flashing and illuminate steadily.)
3.
Use the "Split No." △ or ▽ key (3) to select the split number.
If split codes (sewing interrupt data) exist in one program, the number which indicates
the pattern which has been divided by the split codes is called the split number.
Pattern 1: Split No. 1
Pattern 2: Split No. 2
Pattern 3: Split No. 3
(2) (1)
4441Q
BAS H series
1. USING THE LCD PANEL (BASIC OPERATIONS)
(3)
Work clamp switch (2-step)
Start switch
Left switch
4923Q
Right switch
4169B
11