For Bas-360H/Bas-365H - Brother BAS H Series Instruction Manual

1-5-2. For BAS-360H/BAS-365H

Adjust the intermittent presser foot height by setting the intermittent stroke drop position and the intermittent stroke amount.
[Stroke drop position setting]
(5)
[Stroke amount setting]
Type (1) Touch the △ or ▽ key to select the item to change.
Touch the △ or ▽ key to change the stroke drop position.
Height (2) If you change the value, the sewing machine's intermittent presser foot will move.
Setting range: 0.5 to 7.0 mm, 0.1 mm units, initial value: 2.0 mm
Touch to return the value which currently appears in the display to the value which was first displayed
Reset key (3) when you switched to the setting screen. The sewing machine's intermittent presser foot will move
according to this value.
OK key (4) Touch to confirm the setting value and return to the sewing operation screen.
Cancel key (5) Touch to discard the setting value and return to the sewing operation screen.
Touch the △ or ▽ key to change the stroke amount.
Stroke (6) If you change the value, the sewing machine's intermittent presser foot will move.
Setting range: 0.0 to 10.0 mm, 0.1mm units, initial value: 3.0 mm
1. USING THE LCD PANEL (BASIC OPERATIONS)
(1)
(3)
(2)
(6)
BAS H series
(4)
(9) (7)
(10) (8)
19