Brother BAS H Series Instruction Manual page 20

1. USING THE LCD PANEL (BASIC OPERATIONS)
NOTE:
When setting the work clamp height and the
intermediate work clamp height, check that slider (1) is
touching the work clamp lifter plate assembly (2).
3091B
Intermittent presser foot operation
Doing standby
When lowered
When sewing
5033Q
18
1 Intermittent presser foot lift amount
2 Intermittent presser foot height stroke drop
position
3 Intermittent presser foot stroke amount
* After the presser foot has been replaced, it
will be necessary to make corrections to the
intermittent stroke drop position.
Ask the place of purchase for information on
the correction method.
BAS H series