Direct Selection - Brother BAS H Series Instruction Manual

2-4. Direct selection

You can use the direct selection keys to directly select program numbers and cycle program numbers.
[Sewing operation screen]
<Recording method>
This is carried out using memory switch Nos. 407 to 410.
Setting range: OFF, 001 - 999, C01 - C30
Corresponding memory
switch number
Initial value
・ If there are no program numbers registered in a direct selection key (i.e. it is OFF), "---" will be displayed and the
display will become inactive.
・ If a program number (sewing pattern) which has been registered in a direct selection key cannot be loaded, the
display will be inactive and the key cannot be selected.
・ If you keep pressing a direct selection key, the display will switch to the settings for the program number displayed
with this key.
2. USING THE LCD PANEL (ADVANCED OPERATIONS)
Direct selection Direct selection
1 key 2 key
407
101
BAS H series
Direct selection keys
1 to 4
Direct selection
3 key
408 409
102 103
Direct selection
4 key
410
104
29