For Bas-311H/Bas-326H/Bas-326H-484/Bas-341H/Bas-342H - Brother BAS H Series Instruction Manual

1-5-1. For BAS-311H/BAS-326H/BAS-326H-484/BAS-341H/BAS-342H

(6)
・Work clamp height setting (can only be selected for motor driven-type work clamp)
- Use the Type keys (2) to select "Work Clamp Height".
- If you use the Height keys (3) to change the Height value, the sewing machine's work clamp will move.
(setting range: 15 - 25
- Touch the OK key (4) to confirm, or touch the Cancel key (6) to return to the sewing operation screen
without changing the setting.
- Touch the Reset key (5) to return the value which currently appears in the display to the value which was
first displayed when you switched to the setting screen. The sewing machine's work clamp will operate
according to this value.
・Intermediate work clamp height setting (can only be selected for motor driven-type work clamp)
Selection is only possible when memory switch No. 003 is set to "2".
- Use the Type keys (2) to select "Intermediate Work Clamp Height".
- If you use the Height keys (3) to change the Height value, the sewing machine's work clamp will move.
(setting range: 1 - 15
- Touch the OK key (4) to confirm, or touch the Cancel key (6) to return to the sewing operation screen
without changing the setting.
- Touch the Reset key (5) to return the value which currently appears in the display to the value which was
first displayed when you switched to the setting screen. The sewing machine's work clamp will operate
according to this value.
・Intermittent presser foot height setting
- Use the Type keys (2) to select "Intermittent Presser Foot Height".
- If you use the Height keys (3) to change the Height value, the sewing machine's intermittent presser foot
will move.
(setting range: 0.0 - 10.0
- Touch the OK key (4) to confirm, or touch the Cancel key (6) to return to the sewing operation screen
without changing the setting.
- Touch the Reset key (5) to return the value which currently appears in the display to the value which was
first displayed when you switched to the setting screen. The sewing machine's intermittent presser foot
will operate according to this value.
initial value: 20)
initial value: 7)
initial value: 5.0)
BAS H series
1. USING THE LCD PANEL (BASIC OPERATIONS)
(2)
(5)
(3)
(4)
17