Setting Object Colors - Stratasys Objet1000 Connex 2 User Manual

Setting Object
Colors
DOC-06800 Rev. A
To manually rotate the tray:
Figure 5-59: Tray after rotating it upside-down
To choose how colors are applied on the display:
Color Indicates Model material
Color indicates Model surface
Color indicates if coating is used
Figure 5-60: Colors display options
Before sending a build tray to the printer, or when you perform tray
validation, Objet Studio checks if there is a problem with the stl files or the
positioning of objects on the tray. If so, the affected objects are displayed
with special colors (see "Tray Validation" on page 5-47).
Objet1000 - Connex 2 User Guide
5–43