Table of Contents
Advertisement
5.4
REPLACING THE BATTERY IN THE IGNITION GENERATOR
The battery holder is located at the bottom R/H/S of the fire, unscrew
the cap, fit a new AA battery and re-fit the cap. See Fig. 7 below.
Fig. 7
Spark Generator
Battery Cap
AA Battery
IN THE EVENT OF THE FIRE FAILING TO LIGHT, PLEASE VISUALLY CHECK
FOR SPARKING AT THE IGNITION ELECTRODE ON THE PILOT. IF NO
SPARK IS PRESENT PLEASE REPLACE THE BATTERY AS DETAILED IN
SECTION 4.5 ABOVE. SERVICE CALLS THAT ARE A DIRECT RESULT OF
FLAT BATTERIES WILL BE CHARGED FOR BY THE MANUFACTURER AS
THE BATTERY IN THE FIRE IS A CONSUMABLE ITEM THAT WILL REQUIRE
ROUTINE REPLACEMENT.
28
Advertisement
Table of Contents
