Toshiba Hi-Speed Port Replicator Iii 180W/120W - Toshiba PORTEGE Z30-C User Manual

To wirelessly connect to an external display, you can follow the steps as
described below:
1.
2.
3.
After the connection is established, the name of the Wireless display
device appears under Projectors.
To disconnect the Wireless display device, click the Wireless display
device name and then click Remove device.
Changing the external playback settings
After one or more external displays are connected, the operating system
can automatically detect, identify, and set up the display settings.
You can also manually manage how the external displays work and change
the display settings by pressing P while holding down the Windows (
key. If you disconnect the external display before you turn off the
computer's power, be sure to switch to the internal display.
When you change the display output device, the audio playback device
might not switch automatically. In this case, to set the playback device to
the same device as the display output device, adjust the audio playback
device manually by the following steps:
1.
2.
3.
4.
5.
TOSHIBA Hi-Speed Port Replicator III 180W/
120W
In addition to the ports available on the computer, the TOSHIBA Hi-Speed
Port Replicator III 180W/120W also provides several kinds of ports.
User's Manual
An external display with HDMI™ port and a Wireless display adaptor.
The Wireless display adaptor is a device that connects to the external
display via HDMI™ port and can receive Wi-Fi
computer.
Go to (Settings) and click Devices -> Bluetooth & other devices
-> Add Bluetooth or other device.
Click Wireless display or dock. Your computer will start searching for
the Wireless display device.
After the Wireless display device is searched, follow the on-screen
instructions to finish connection.
Click Start -> Windows System -> Control Panel -> Hardware and
Sound -> Sound.
In the Playback tab, select the playback device which you want to
switch to.
To use the internal speakers on your computer, select Speakers. To
use the television or the external monitor that you have connected to
the computer, select a different playback device.
Click the Set Default button.
Click OK to close the Sound dialog.
®
signals from your
)
4-24