Toshiba PORTEGE Z30-C User Manual page 86

External RGB monitor port
An external analog monitor can be connected to the External RGB monitor
port on the computer. To connect an external analog monitor, do the
following:
1.
There are no fastening screws for an external monitor cable on the
External RGB monitor port. However, external monitor cables which have
connectors with fastening screws can still be used.
2.
Figure 4-11 Connecting the RGB cable to the External RGB monitor port (Z30-C)
1. External RGB monitor port
Product appearance depends on the model you purchased.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is a color or monochrome device.
When displaying desktop on an external RGB monitor, desktop is
sometimes displayed on the center of the monitor with black bars around
desktop (with small size).
At that time, read the manual of the monitor and set the display mode
which is supporting at the monitor. Then it will be displayed with suitable
size with correct aspect ratio.
The HDMI™ out port
Some models are equipped with an HDMI™ out port. HDMI™ (High-
Definition Multimedia Interface™) port digitally transfers both video and
audio data without reducing the quality. HDMI™-compatible external
display devices including televisions can be connected via the HDMI™ out
port.
To connect an HDMI™-compatible display device, do the following:
To connect a device to the HDMI™ out port, you must purchase a suitable
HDMI™ cable.
1.
User's Manual
Connect the RGB cable to the External RGB monitor port.
Turn the external monitor's power on.
2
Plug one end of the HDMI™ cable into the HDMI™ in port of the
HDMI™ display device.
1
2. RGB cable
4-22