Toshiba PORTEGE Z30-C User Manual page 93

When you first launch the Realtek HD Audio Manager, you can see two
device tabs. Speakers is the default output device. Microphone Array is
the default input device. To change the default device, click the Set
Default Device button under the chosen device tab.
Information
Click the Information button
information, and language setting.
Power Management
The audio controller in your computer can be turned off when the audio
function is not used. To adjust the configuration of audio power
management, click the Power Management button
Speaker Configuration
Click the Auto Test button
headphone sound is coming from the right direction.
Default Format
You can change the sample rate and bit depth of sound.
Headphone/Microphone selection
To change the type of headphone or microphone, do the following:
1.
2.
3.
Video mode
Video mode settings are configured via the Display dialog.
To open the Display dialog, click Start ->
Display.
If you are running some applications (for example a 3D application or video
playback), you might see some disturbance, flickering, or frame dropping
on your screen.
User's Manual
When audio power management is enabled, the circle button at the
upper left of the Power Management is blue and convex.
When audio power management is disabled, the button is black and
concave.
Plug a headphone or microphone into the headphone/microphone
combo jack.
Double-click on the circle button
Audio Manager main screen.
Select one from the device list for the device you plugged into.
to view hardware information, software
to confirm the internal speakers or the
in the right side of the Realtek HD
(Settings) -> System ->
.
4-29