Toshiba Hi-Speed Port Replicator Iii 180W/120W - Toshiba Satellite Pro A30-C User Manual

Hide thumbs Also See for Satellite Pro A30-C:
Table of Contents

Advertisement

key. If you disconnect the external display before you turn off the
computer's power, be sure to switch to the internal display.
When you change the display output device, the audio playback device
might not switch automatically. In this case, in order to set the playback
device to the same device as the display output device, adjust the audio
playback device manually by the following steps:
1.
2.
3.
4.
5.
TOSHIBA Hi-Speed Port Replicator III 180W/
120W
In addition to the ports available on the computer, the TOSHIBA Hi-Speed
Port Replicator III 180W/120W also provides several kinds of ports.
The Port Replicator connects directly to the docking interface on the
underside of the computer. The AC adaptor connects the Port Replicator to
a power source.
To dock your computer in the Port Replicator, do the following:
1.
User's Manual
Click Start -> Windows System -> Control Panel -> Hardware and
Sound -> Sound.
In the Playback tab, select the playback device which you want to
switch to.
To use the internal speakers on your computer, select Speakers. To
use the television or the external monitor that you have connected to
the computer, select a different playback device.
Click the Set Default button.
Click OK to close the Sound dialog.
You must connect the AC adaptor before you connect to a Port
Replicator.
When your computer is docked in the Port Replicator, the following
ports on the computer, if present, are not operational:
LAN jack
HDMI™ out port
External RGB monitor port
Headphone/Microphone jack
When you use external display ports on the Port Replicator or on your
computer, some software might show different type of ports which you
connected.
When connecting an AC Adaptor to the Port Replicator, use only the
AC Adaptor included with Port Replicator. Do not use the computer's
AC Adaptor.
Refer to the Port Replicator's User's Manual for more details.
For A30-C: Align the top left or top right corner of your computer to
the A+ mark on the Port Replicator.
4-42

Advertisement

Table of Contents
loading

Table of Contents