Steering Cable - Starboard Side Routed Cable - Mercury 200 OptiMax Manual

OUTBOARD INSTALLATION
2. Thread the lifting eye into the flywheel hub for a minimum of
five turns.
a - Lifting eye
3. Connect a hoist to the lifting eye.
4. Lift the outboard and place it on the boat transom.
Lifting Eye
Steering Cable ‑ Starboard Side Routed Cable
1. Lubricate O‑ring seal and entire cable end.
95
Tube Ref No.
2-4-C with Teflon
95
2756
Description
91
a
Threads into the flywheel to
remove the powerhead assembly
from the driveshaft housing, or to
lift entire engine for removal/
installation.
Where Used
O-ring seal and entire
cable end
28495
91‑90455‑‑1
3724
Part No.
92-802859A
1