Power Supply - Lenovo RackSwitch G8264CS Installation Manual

Power Supply

28
G8264CS Installation Guide
Fan LEDs
If there is a failure of one or more fans, the front panel Fan LED flashes.
Additional Fan LED indicators are located on the rear panel of the switch, on the
individual fan modules.
The following table describes the fan module LED behavior.
Table 8. Fan module status LED behavior
LED State Functional Meaning
On Fan is operational
Off Fan module has no power.
Flashing Fan speed has failed. Replace the fan module.
The rear panel of the G8264CS has two bays for hot-swap power supply modules.
Each power supply module has an individual IEC 320 C14 power connector. The
power cord attaches to a universal grounded AC power source.
Compatible power options are listed in the
Statement 5
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current
from the device, ensure that all power cords are disconnected from the power
source.
Lenovo Networking Catalog.