Connecting A Tablet Or Pc To The Printer (Pairing) - Star SM-L200 Series Hardware Manual

2.2 Connecting a tablet or PC to the printer (pairing)

1. Press and hold MODE button for approx. 2 seconds, and printer is turned on.
Then, it is ready to pair with another Bluetooth device.
2. If necessary, enter the following information into the terminal that you are using.
PIN: 1234 (default)
Device name: "STAR L200-XXXXX"(default)
Device name: "STAR L204-XXXXX"(MSR model)
(XXXXX is the last digits of the Product Serial Number)
Notes:
1.SM-L200 has two Bluetooth modes:
a) One is Bluetooth Ver3.0 with PIN for Android or Windows system. PIN and Device name can be changed
through Star Utility. To obtain this utility, please contact with your dealer.
b) Another is Bluetooth 4.0(BLE) without PIN for iOS system.
2.SM-L200 changes the Bluetooth mode automatically by host system
3.Pairing sets one by one in order, otherwise it can't figure out which one succeeds in pairing.
®
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Star is under license.(Design and specifications subject to change without notice.)
You can test the connectivity with a host device by using StarIO SDK Application which is available
on Apple Store and Google play
9