Table of Contents
Advertisement
Item
Charging
Battery
Power supply
Battery
operating time
OLED
MSR
Format
(Single Head)
MSR model only
Security
Paper type
Paper width
Paper
Paper thickness
Roll paper diameter
Recommended paper
Operation condition
Charging condition
Physical
Storage condition
characteristics
Dimension
Weight
Reliability
TPH
Software
Emulation
*1. When the printer is used in a low temperature environment (less than 10 degrees), the battery's
performance will be diminished, and the amount of time that you can use the printer for may be reduced.
WARNING:
Pls.use the recommended thermal paper or same quality paper, otherwise it will influence the printing quality
and decrease the thermal print head life.
Pls. Use at a room temperature if you want to set the print density to "Special".
Some types of the paper are not suitable for use in low-temperature environment.
Table 5-1 General Specification(Continued)
USB charge
Output DC 5V
5H
1700mA 3.7V rechargeable battery pack
Approximately 13 hour printing (12 receipts per hour with
sleep mode)
128 x 64 dots with Blue Backlight
ISO 7810, ISO 7811, ISO7812 1st, 2nd and 3rd Track/ JISII
Track Reading
AES or 3DES encryption. DUKPT Key Management
Thermal paper
57.5±0.5mm
0.053mm≤X ≤0.12mm
13mm≤Ø≤40.5mm
P220AG, PD450, FD200, Alpha 400-2.1
0°C to 50°C, 20% to 85%RH
0°C to 40°C, 0~10℃ *1
-20°C to 60°C, 5% to 95%RH
86(W) x 122.5(D) x 46(H) mm
220g (including battery pack)
50km(not more than 12.5% printing density)/100 million
pulses
StarPRNT mode
Parameter
0.5A,Time required for full charge:
32
(2/2)
Advertisement
Table of Contents
