Table of Contents
Advertisement
Example
When you want to change the settings of the printer mode as shown below,
1 Density
2 Standby Time
3 Auto Off Time
4 Smart Power
5 Paper Type
6 Factory Reset
7 Password
8 Previous Menu
Press and hold the MODE & FEED buttons for 5 seconds.
→You will see present "Enter Menu Mode" in the OLED.
Press the MODE button once to switch the menu item.
Display: 1 Self Test →2 System Setting
Press the FEED button once to get into the System Setting menu.
→You will see present "Input Password 0000" in the OLED.
→Press FEED button to move cursor("_"),Press MODE button to switch the number (0~9).
Password: 0000(default)
→Press and hold the FEED button for 2 seconds to get into the menu.
Display:
1 Density
2 Standby Time
3 Auto off Time
4 Smart Power
[Density]
Press MODE button to switch the menu item,then press the FEED button once to enter the menu.
→Press the FEED button once to get into the Density menu.
Display:
Density:
0-Medium
2-High
3-Special
Item
Factory Setting
0(Medium)
0060(Sec)
0000(Invalid)
0(Disable)
0(Receipt)
0(Cancel)
0000
---
1-Low
0
Configuration Example
1(Low)
0080(Sec)
1000(Min)
0(Disable)
2(BM(Back))
0(Cancel)
2222
---
20
Advertisement
Table of Contents
