CAUTION
When ERROR lamp is flashing, please make sure the cover is closed correctly. If it's not, open the
cover and close it correctly.
When the paper is jammed, be sure to open the printer cover before removing the jammed paper.
Do not under any circumstances try to pull out the jammed paper forcefully while the printer cover
is closed, doing so may damage parts of the printer.
Caution Symbol
This symbol is placed near the thermal head to indicate that it may be hot.
Never touch the thermal head immediately after the printer has been used.
Also, even when the thermal head is not hot, do not touch it, because static electricity
can damage the devices inside the thermal head.
WARNING
1) Do not touch the tear bar.
- There is a tear bar inside the paper outlet slot. You could neither put your hand in the paper
outlet slot while printing is in progress nor put your hand into the outlet even when printing is not in
progress.
- The paper cover can be opened when replacing the paper. However, since the tear bar is on the inside of
the paper cover, be careful not to place your face or hands too close to the tear bar.
2) During and immediately after printing, the area around the thermal head is very hot. Do not touch it, as
you could be burned.
13